INVERTER, POWER, CHARGER, 230V, 1050 WATTS

INVERTER/CHARGER,
W/HWR, 1050-WATT, 230V, 50HZ
MATERIAL: ALUMINUM, PLASTIC
OUTPUT AT 230 OR 240 VAC-CONTINUOUS:1050
SURGE CAPACITY AT 230 OR 240 VAC (3SECS):2100
INPUT VOLTAGE, VDC: 12VDC NOMINAL
(DEEP CYCLE BATTERY RECOMMENDED):10.5 VDC MINIMUM, 16.0 VDC MAXIMUM
OUTPUT VOLTAGE: 230VAC ?5%
NO LOAD CURRENT DRAW (BATTERY): 1 AMP
NO LOAD CURRENT DRAW (BATTERY): 0.020 AMPS(POWER OFF)
FREQUENCY: 50 HERTZ ?0.1%
OUTPUT WAVEFORM: MODIFIED SINE WAVE
BATTERY CHARGER (IF EQUIPPED)
CHARGING CAPACITY AMPS: 55 AMPS HIGH, 27.5 AMPS LOW
INPUT VOLTAGE, VAC:23 VAC?10%
INPUT CURRENT, IAC: 4
BULK VOLTAGE, VDC: 14.2 (FLOODED) 14.1 (GEL)
FLOAT VOLTAGE, VAC:13.2 (FLOODED) 13.6 (GEL)
BYPASS
OUTPUT CURRENT, HANDWIRED (H SUFFIX) :30 AMPS
ANBIENT TEMPERATURE: -40 TO +105 OF, -40 TO +40 OC
COOLING AIR: FAN COOLED, 30 CFM
CHASSIS: ALUMINUM
THE HARDWIRED UNITS (MODELS WITH H SUFFIX ON THE P/N) HAVE 3 WIRES (BLACK FOR HOT, WHITE FOR NEUTRAL, GREEN FOR GND) USED TO CONNECT THE AC INPUT OF THE INVERTER/CHARGER TO THE AC INPUT POWER WITH WIRE NUTS, AND 3 SIMILAR WIRES WITH WIRE NUTS TO CONNECT THE AC OUTPUT OF THE INVERTER/CHARGER TO ITS AC LOAD CENTER.
THE BRAVO QBC10 CONVERTS THE POWER OF A BATTERY TO 1050 WATTS OF 120 VAC MODIFIED SINE WAVE POWER TO OPERATE LIGHTS, TOOLS AND APPLIANCES. BRAVO IS SIMPLY CONNECTED TO THE POSITIVE AND NEGATIVE POSTS OF A BATTERY SYSTEM WITH APPROPRIATE FUSING AND, WHEN TURNED ON, PRODUCES 120 VAC POWER. THE INVERTER ALSO HAS AN ENERGY SAVING FEATURE CALLED LOAD DEMAND. WHILE IN LOAD DEMAND MODE, THE INVERTER OUTPUT IS PULSED. THIS SIGNIFICANTLY REDUCES THE CURRENT DRAW FROM THE BATTERY UNTIL A DEMAND IS MADE ON ITS OUTPUT. CONTINUOUS OUTPUT OF 120 VAC RESUMES WHEN A LOAD GREATER THAN 5 WATTS IS APPLIED.